PVDF Acid Pump
The CNP pump series is excellently suited to pumping tasks in the chemical industry, electroplating plants, metallurgical industries, steel and stainless steel pickling lines, evaporation and regeneration units, wet flue gas cleaning systems downstream of waste incinerators as well as in exhaust air scrubbing and industrial waste water treatment.
PVDF Acid Pump | CNP Type
Application:
Chemically aggressive, even contaminated, media throughout the whole range of chemical processing technology, surface coating technology, environ-mental engineering and other areas of industry.
1.Chlor-Alkali Electrolysis
2.Sulphuric acid
3.Steel and Stainless steel pickles
4.Titanium dioxide
5.Phosphoric acid
6.Sea water
7.Waste incineration (flue gas cleaning)
8.Scrubber
9.Waste water
10.Hydrochlorid acid
Standard Executed:
ISO 5199, ISO 2858, EN 22858
Type:
Horizontal, single-stage
Construction:
Back-pull-out design according to ISO 2858
Impeller:
Closed or semi-open
Sealings:
Single type or double type
Bearing lubrication:
Grease
Installation versions:
Base frame welded or cast iron base plate
Ambient temperature:
-20deg.c to 60deg.c
Solid content limit value:
approx. 5 %
Materials:
PP,PE,UHMW-PE,PVDF,FEP,PFA
Operation temp:
Up to 110 deg.c
Related products
Materials: The chemical pumps are available in PP, PE-UHMW as well as PVDF.
The CNP pump series is excellently suited to pumping tasks in the chemical industry, electroplating plants, metallurgical industries, steel and stainless steel pickling lines, evaporation and regeneration units, wet flue gas cleaning systems downstream of waste incinerators as well as in exhaust air scrubbing and industrial waste water treatment.
Pump Materials: The chemical pumps are available in PP, PE-UHMW,PVDF and FEP.
Materials The chemical pumps are available in PP, PE-UHMW as well as PVDF.
Pump Materials: The chemical pumps are available in PP, UHMW-PE, PVDF and FEP Mechanical Seal: Single and Double Mechanical Seal for options Shaft Sleeves: SS,PP/PVDF Coating
Performance data Pump capacity: up to 1200 m³/h Total differential head: up to 100 m Operating temperature [t]: -20°C up to +110 °C Operating pressure [p]: up to 10 bar Diameter of discharge nozzle: DN 25 up to DN 250 Drive rating [P]: up to 200 kW
PP Chemical Process Pump is for all kinds of aggressive liquids.Working temperature range:90 deg.c max.
Materials: The chemical pumps are available in PP, PE-UHMW as well as PVDF.